Heat pumps in Whangarei, sized right for damp coastal homes
Heat pumps supplied and fitted for Northland's humid winters, sticky summers and salt-laden coastal air, by an experienced local installer. The right size for your rooms beats brand or grunt every time, and you'll get a clear, fixed price before the job starts.
How your local installer can help
From a single high-wall unit for a cold back bedroom to a whole-home system that keeps every room even, here is what they can help with, for homes right across greater Whangarei and out to Bream Bay.
Most popular
Heat pump installation
Tidy, well-placed installs done for damp Northland homes, with corrosion-ready outdoor units sited to handle the salt air off the harbour and the coast.
How installation works
How much does it cost?
Straight talk on what a heat pump really costs to supply and fit in Whangarei, with honest price ranges and no surprises once you're quoted.
See full cost guide
Ducted whole-home systems
Quiet, even warmth through the whole house with the unit tucked out of sight, ideal for newer open-plan builds around One Tree Point and Ruakaka.
About ducted systems
Types of heat pump
High-wall, floor console, ceiling cassette, multi-split or ducted; here's how to match the right type to your rooms, your glazing and your budget.
Compare types
Servicing and repairs
Your local installer services and maintains the systems they install, keeping salt-exposed coastal units running clean through Northland's damp, filter-clogging winters.
How servicing works
Air conditioning
A heat pump is a reverse-cycle air conditioner, so the same unit that warms you in winter cools and dries the house through our sticky humid summers.
About air conditioningThe Warmer Kiwi Homes grant can cover 90% of your heat pump
If your home was built before 2008 and you hold a Community Services Card, a SuperGold Combo Card, or live in a lower-income area, the Warmer Kiwi Homes programme covers 90% of an approved high-wall heat pump, capped at $3,450 incl GST. We can help you check whether your place qualifies.
How it works
No pressure and no jargon. Here is how you get from a cold, damp house to a warm, dry one.
Free quote
Tell us about your home and what you want warmed or cooled, and you'll hear back with honest options, usually before the end of the same day.
Site visit
Your installer visits to measure the rooms, check insulation and glazing, and look at where the outdoor unit can sit sheltered from the salt air.
The install
Your heat pump is fitted tidily by an experienced local team, tested, and you're shown how to run it so it heats well without stinging your power bill.
Backed by warranty
Your unit is covered by the manufacturer's warranty, and because your installer only looks after the systems they install, you know exactly who to call.
Why Whangarei homeowners choose us
Your local installer knows Northland homes inside out, installs for the way they're actually built, and would rather size a job right than talk you into the biggest box on the shelf.
Sized for your home, not upsold
Your installer measures your rooms, insulation and glazing and sizes the unit to match. Getting that right matters far more than badge or grunt, and it keeps running costs down.
Built for the coast
Salt-laden air off the harbour and Bream Bay is hard on outdoor units, so your installer chooses corrosion-resistant models and sites them somewhere sheltered from the worst of it.
A tidy install that lasts
A neat, well-placed install matters more than a cheap sticker price. Good pipework, sensible siting and proper commissioning are what keep a unit quiet and reliable for years.
One trusted local team, start to finish
Your local installer installs heat pumps and then services and repairs the systems they fit, so there is one team that knows your unit and one number to call if anything ever needs sorting.
We know Northland homes
From uninsulated 1950s weatherboard bungalows to newer open-plan coastal builds, your local installer knows how our damp, mould-prone houses behave and what actually keeps them warm and dry.
Honest, fixed pricing
You get a clear price for the whole job before it starts, so there is nothing extra tacked on at the end. If a cheaper option genuinely suits your home, you'll be told so, straight up.
Brands fitted in Whangarei
All the major brands are fitted, and your local installer isn't tied to any one of them, so you get the unit that genuinely suits your home and budget, not whatever's being pushed.
Not sure what size heat pump you need?
A unit that is too big cycles on and off and costs more to run; too small and it never quite warms the place. Our quick calculator gives you a ballpark kW for your room in under a minute.
Areas we cover
Heat pumps go in right across greater Whangarei, from the hill suburbs and inner-city villas down to the low-lying river flats and out to the exposed coastal settlements of Bream Bay.
Whangarei city
From the inner-suburb villas of Kensington and Riverside to the hill homes of Maunu and Whau Valley, your local installer handles heat pump installation across the city suburbs to suit damp, single-glazed houses.
Kamo & the north
Kamo, Tikipunga and Regent sit in cooler valley pockets where condensation lingers, so units are sized to clear the damp quickly and evenly.
Onerahi & the harbour
Exposed harbour-side homes around Onerahi and Parua Bay cop plenty of salt air, so corrosion-resistant units and sheltered outdoor siting really matter here.
Bream Bay coast
Ruakaka, Waipu and One Tree Point are full of newer open-plan builds, where ducted and multi-split systems usually beat a single high-wall unit.
Common questions
How much does a heat pump cost in NZ?
A single high-wall heat pump supplied and fitted usually runs from about $2,000 to $5,800, depending on the size of the unit and the room it heats. Multi-room and ducted systems cost more. We give a clear installation cost up front, and the Warmer Kiwi Homes grant can cover 90% of an approved high-wall unit for eligible homes.
What is the best heat pump for a NZ home?
There is no single best brand. The right unit is the one sized correctly for your room and climate, which matters far more than badge or grunt. Premium options like Mitsubishi Electric heat pumps and Daikin heat pumps are fitted alongside solid mid-range picks, then matched to your home. Compare the types of heat pump or run our heat pump sizing calculator to get a feel for it.
Do heat pumps work well in humid climates?
Yes. A modern heat pump both heats and cools, and in Whangarei's humid subtropical air the cooling mode also dries the room out, which helps with the condensation and mould that plague damp homes. In summer it doubles as air conditioning. Salt air off the coast is the real enemy, so corrosion-resistant units and regular heat pump servicing keep them running for years.
How long does it take to install a heat pump?
Most single high-wall installs are done in three to four hours, with everything tidied up before your installer leaves. A standard heat pump installation is usually a same-day job, while multi-room and ducted heat pumps take longer to plan and fit. Tell us about your home to get a free heat pump quote and we will sort out the timing with you.